Home | Wheelchairs | Recliners | Patient Lifts | Beds | Nurse Call  | Respiratory | PVC | Patient Room | Casters | Contact Us
C.D. Sparling Company Stainless Steel Grab Bars

Grab bars are manufactured with Type 304 stainless steel. The series is available in 1 1/2" and 1 1/4 " diameter 18 gauge (.049) tubing, 3" diameter 16 gauge (.065) mounting flanges and 24 gauge (.024) round concealed covers. Finish is satin stainless.  Available in polished mirror finish upon request
Specifications: Bars meeting the Handicapped Codes must have 1 1/2" clearance between the wall and the bar and must be 1 1/2" or 1 1/4" diameter. Bars must also withstand 300 pounds static weight for a period of 5 minutes with full recovery. C. D. Sparling Company grab bars exceed these requirements

34-1804
Wall to Floor w/ Universal
Outrigger!
1-1/2" Diameter, Stainless Steel, Concealed Flange
ORDER NO.DESCRIPTIONPRICE
34-121212" Straight Bar, 1-1/2" Diameter41.90
34-121616" Straight Bar, 1-1/2" Diameter45.40
34-121818" Straight Bar, 1-1/2" Diameter47.20
34-122424" Straight Bar, 1-1/2" Diameter52.80
34-123030" Straight Bar, 1-1/2" Diameter58.10
34-123232" Straight Bar, 1-1/2" Diameter59.90
34-124242" Straight Bar, 1-1/2" Diameter63.60
34-124848" Straight Bar, 1-1/2" Diameter74.50
34-180120" x 40" Inside Corner Bar, 1-1/2" Diameter153.00
34-180230" x 33" Wall to Floor Bar, 1-1/2" Diameter141.60
34-180330" x 33" Wall to Floor Bar w/3" Stub, 1-1/2" Diameter146.40
34-180430" x 33" Wall to Floor Bar w/Universal Outrigger, 1-1/2" Diameter176.30
34-180516" x 32" Right Hand 90° Angle Bar, 1-1/2" Diameter133.70
34-180616" x 32" Left Hand 90° Angle Bar, 1-1/2" Diameter133.70
1-1/4" Diameter, Stainless Steel, Concealed Flange
ORDER NO.DESCRIPTIONPRICE
34-141212" Straight Bar, 1-1/4" Diameter40.30
34-141616" Straight Bar, 1-1/4" Diameter43.90
34-141818" Straight Bar, 1-1/4" Diameter45.80
34-142424" Straight Bar, 1-1/4" Diameter51.20
34-143030" Straight Bar, 1-1/4" Diameter56.70
34-143232" Straight Bar, 1-1/4" Diameter59.30
34-144242" Straight Bar, 1-1/4" Diameter67.50
34-144848" Straight Bar, 1-1/4" Diameter72.90
34-280120" x 40" Inside Corner Bar, 1-1/4" Diameter135.60
34-280230" x 33" Wall to Floor Bar, 1-1/4" Diameter126.30
34-280330" x 33" Wall to Floor Bar w/3" Stub, 1-1/4" Diameter130.30
34-280430" x 33" Wall to Floor Bar w/Universal Outrigger, 1-1/4" Diameter161.80
34-280516" x 32" Right Hand 90° Angle Bar, 1-1/4" Diameter119.30
34-280616" x 32" Left Hand 90° Angle Bar, 1-1/4" Diameter119.30
Channel Backer

The "Channel Backer®" is specifically engineered to be used on a 1/2" and 5/8" drywall. Presently available in two distinct models, the  "Channel Backer®" is manufactured from 18 gauge (.049) type 304 stainless steel and high density polyethylene. Load results exceed the ASTM F446-85 Standard, which requires grab bars that are installed horizontally withstand an applied downward load of 250 pounds. See chart for recommended applications and load results

MODELSFLANGE HOLE CENTERSDRYWALL/WALL THICKNESSLOAD RESULTS
CB-4-GB2" THRU 2 ½"*5/8" AND 3/4"520 LBS
CB-6-GB2" THRU 2 ½"*1/2" (not greater) 420 LBS
Back
Medical Parts Source, Inc. | All Rights Reserved